As a new type of thermal insulation building decoration material, metal carved board prefab house has been widely used in various engineering construction fields in recent years, but many customers still don't know what the material of the carved board is.
There are many types of materials for metal carved board mobile homes. In terms of insulation materials, the common ones are rock wool insulation board, insulation foam board, extruded polystyrene board, polystyrene insulation board, perlite board, etc., and there is no problem with heat preservation and fire resistance. Generally speaking, it mainly depends on the design drawings of the engineering project or considers the overall cost performance.
There are many kinds of finishes for exterior wall carving panels, the more common ones are: real stone paint (imitation stone paint), metal material/solid color fluorocarbon spraying, water-in-water paint, etc. There are many opinions about the finish of real stone paint. For example, when a customer comes to consult, he will say imitation stone, because the characteristic of real stone paint is that the actual effect of imitation stone brick is real.
The prefabricated house with metal carved panels integrates thermal insulation and decoration design, and can be assembled in time, which greatly saves human resources and time. It is mainly divided into three layers: backing layer, insulation layer and finishing coating.
The backing layer is made of inorganic resin materials with high toughness and adhesion, which is environmentally friendly, energy-saving and environmentally friendly; the insulation layer is made of high-flame-retardant insulation materials, low heat transfer coefficient, high-quality insulation core board (EPS, XPS, polyurethane foam board (PU), Rock wool panels (RW) await). There are more than 2,000 kinds, with exquisite appearance, and various decorative shapes and color lines can be completed according to one's own needs.
The mobile house with metal carved panels can exert a good waterproof effect, prevent the insulation layer from falling off, and effectively and durably protect the exterior wall of the building. The coating is hard and wear-resistant, has high hardness, and has the characteristics of waterproof, anti-corrosion, acid resistance, and crack resistance, so that the outer wall forms a wall insulation material-wall system to achieve the effect of heat preservation and energy saving. Large-area coil waterproofing and large-area polyurethane waterproof coating waterproofing roofs for industrial and civil buildings.
The size of the polystyrene board for the metal carved board activity room is 1200×600mm. Non-standard sizes or local irregularities can be cut on-site, but the cut must be perpendicular to the board surface. The layout of the insulation board should be incorrectly arranged at the corners of the entire wall. According to the current laws and regulations, the warranty period for the exterior wall is two years, and after two years, repairs will also be more difficult. For this reason, it is necessary to re-do the schematic design or preliminary design through the construction drawing review or due to design changes and other reasons.
