exterior cladding panels

Internal product code: LZ-732

 

 

Product name	exterior cladding panels
Size	3800/4000*380 (Length can be customized,MOQ>1000Sqm)
Surface Textures and Appearance	Coarse brick veins;Wide or narrow brick veins;Standard brick veins;Standard brick veins;Bark veins;Stone veins;Plain veins
Materials	Polyurethane
Thickness	16mm/20mm
Unit weight	3.5kg/m³-3.7kg/m³
Waterproof rate	415%
Wind resistance	8.0Kpa
Thermal conductivity	0.025W/m·k
Thermal Resistance	2.09㎡k/w
PU Density	40kg/m³
Compressive strength	52.7kpa
Characteristic	Good temp-keeping and heat insulation
Fine fireproof	Test by national quality inspection center for fireproof building material, all its index reach grade B1 According to your requirement(B1/B2)
Technical support	Incidental engineering drawings
Used	Various roofs and walls referring to the large size factory buildings, storages, exhibition halls, gymnasiums, freezing stores and purification workshops
Installation	Convenient and flexible without the large- size lifting devices so that the construction period is limited with the lower comprenhensive costs
Application	Polyurethane /pu foam sandwich panel(exterior/interior wall panel) can be used on any structural buildings ,brick wall, Steel structure, cement wall,wood wall etc for decoration and insulation.

 

 

 

1 Easy Installation :	Just screw the product onto steel/wooden frame.
2 Cost Reduction :	Save up to 60% of build time & labor cost.
3 Energy-saving :	Heat conducting efficiency:0.019 W/m.k
4 Thermal Insulation :	Core density:40 Kg/m3
5 Light Weight :	Only 3.17 Kg/m2
6 Eco-friendly :	Minimum construction waste,100% reusable.
7 Easy Maintain :	No need to repaint
8 Fire-resistant :	Fire resistance(core):B1 grade
	Oxygen index test method:26.2 %
	Combustion growth rate exponential:211 W/s
9 Waterproof :	Water absorbing capacity(core):0.9 (V/V)%
	Impermeability(panel):1.5 mm
10 Earthquake proof :	Maximum bending capacity:1.46 Kn/m²
11 Long-lasting :	Peeling resistance:95%
	Cohesional strength:0.14 Mpa
	Compressive strength:0.21 Mpa
12 Decoration :	Hundreds of colors and designs of various stunning effects.

There are many styles of wood siding available that can be used to achieve different aesthetics. One such style is exterior cladding, which features vertical panels with seams covered with thin strips. While it is commonly found in barns and agricultural buildings, it can also enhance the appearance of residential buildings, providing a rustic and nostalgic charm that many find attractive.

 

Board siding is another type of wood-look siding. This sleek and simple design is often preferred in modern and contemporary buildings. Its ability to effectively cover a wide area makes it an attractive option for builders looking for convenience and speed.

 

For a unique and attractive look, exterior faux wood grain offers an excellent option. Modified with the grain of natural materials such as cedar, redwood, cypress and spruce, these panels can be used to cover entire exteriors, creating eye-catching designs.

 

Our products are a suitable choice for curtain walls and offer advantages over traditional options. It has the characteristics of long life cycle, easy installation and short construction time.

 

However, it's worth noting that wood veneer siding may lack durability due to its material composition. For example, rubberwood emits a distinct odor and is prone to discoloration, rot, and insect infestation due to its high sugar content. It is also prone to problems such as difficulty in drying, lack of wear resistance, cracks and deformation during processing.

Exterior siding can be widely used in municipal construction, apartment and residence, office hall villa gardens scenic spots old building reconstruction, guard posts, and many other engineering fields the building material is not only applicable to new brick concrete structures, frame structures, steel structure, light body room and other types of buildings but also applicable to the decoration and energy-saving transformation of existing buildings as well as indoor and outdoor decoration. exterior foam insulation panel is becoming the first choice of more and more wall thermal insulation decorative building materials.

1.Prepare the wall surface and ensure it is clean and flat.

2.Apply adhesive or use mechanical fasteners to secure the panels to the wall.

3.Align the panels properly and ensure tight joints between them.

4.Install corner profiles and edge trims for a finished look.

5.Inspect and adjust the panels as necessary to ensure proper alignment and fit.

6.Seal joints and gaps with appropriate sealants to prevent water and air infiltration.

7.Complete the installation by adding any necessary accessories or finishing touches.

8.Conduct a final inspection to ensure the panels are securely installed and meet quality standards.

 

 

Siding panels find extensive applications in various types of buildings, including but not limited to:

Industrial Buildings: They are suitable for insulating the exterior walls of factories and warehouses, effectively reducing energy consumption and improving thermal insulation performance.

Commercial Buildings: Hotels, restaurants, and parking lots benefit from Baffet insulation panels for thermal insulation in their exterior walls, roofs, and underground parking areas. These panels provide a comfortable indoor environment and energy-saving benefits.

Residential Buildings: Whether it's renovation projects, steel structures, container houses, prefabricated houses, brick-concrete residences, tool sheds, or A-frame houses, Baffet insulation panels are adaptable for insulating the exterior walls of various residential buildings. They also serve well for unique structures like tool sheds and A-frame houses.

Tourist Buildings: Baffet insulation panels are ideal for insulating the exterior walls of tourist accommodations such as guesthouses, holiday hotels, and wooden cabins. They ensure a comfortable and warm living environment.

Exterior cladding panels are widely used in industrial, commercial, residential, and tourist buildings, offering excellent thermal insulation performance and decorative effects.

 

 

Q: Are you a trading company or manufacturer?
A: We take pride in being a manufacturer. You're always welcome to visit our factory and see our operations firsthand.

Q: How long is your delivery time?
A: Generally, our delivery time is 15 days. We strive to ensure prompt and efficient delivery of our products.

Q: Do you provide samples? Is it free or extra?
A: Yes, we offer panel samples to our customers. The provision of samples may be subject to product requirements. Please consult us for further details.

Q: What is your payment term?
A: We accept payment through T/T (bank transfer) or L/C (letter of credit). Additionally, we also accept Ali trade assurance as a secure payment option.

Q: How is your after-sales policy?
A: Our commitment is to provide the best products and services to each of our clients. We offer online after-sales training to address any queries or concerns. If necessary, you are more than welcome to visit us at our factory for further assistance and support.