BFT Insulated Wall Panels

Internal product code: ZXG-701

1：The efficient thermal insulation of BFT insulated wall panels is because the thermal conductivity of the foaming agent used in polyurethane is much lower than that of air (good thermal insulation performance), so the thermal insulation performance of rigid polyurethane foam is superior to those materials containing only air, such as mineral wool, glass fiber, and polystyrene. Moreover, its unique closed-cell property and high resistance to gas diffusion make it have excellent long-term insulation performance, and its thermal insulation performance can last for 20-50 years or more.

2：The closed-cell structure and surface material of the excellent corrosion-resistant polyurethane rigid foam make it have better air and water vapor resistance performance, and it can be made into a mosaic connection structure when it is formed, which is easy for post-assembly. It does not need an additional insulation layer to prevent moisture, which saves a lot of trouble in laying the insulation layer. These properties cannot be possessed by other insulating materials at the same time.

3：Wide, light, and thin wall Because polyurethane rigid foam acts as a structural material at the same time, the overall structure has the advantages of light weight, large span, and high load. Compared with other insulating materials, polyurethane rigid foam has the best thermal insulation performance. Therefore, the thinner polyurethane sandwich panel can meet the relevant provisions on building energy consumption limit, which allows the use of thinner panels during construction and saves building space.

4：With stable quality and high production efficiency, the factory production line of BFT insulated wall panels has brought a good economy and competitiveness in addition to convenient quality control under the situation of a sharp increase in demand.

5：Good weather resistance and easy installation. After prefabrication in our factory, BFT-insulated wall panels can be directly used for construction and installation without additional procedures, and construction is fast. In addition, it is not necessary to take into account the change in the weather and carry out production as planned.

The exterior wall panel is composed of three layers: the top layer, the core layer, and the backing layer. The top layer is made up of a substrate with a thickness of at least 0.2mm and a high weather-resistant coating, which is typically 25-35μm thick. The core layer is made up of polyurethane foam, which benefits from having uniform and densely packed bubbles to provide insulation. The backing layer is made up of an aluminum foil-coated fabric, with a thickness typically between 0.02-0.05mm.

The substrate is the main body of the top layer, with a thickness of at least 0.2mm. Materials such as aluminum-zinc steel plates and color steel plates are usually used as substrates, providing high strength and corrosion resistance. The choice of the substrate should be made based on the specific needs of the project and the environment it will be used in.

The high weather-resistant coating on the top layer protects the panel from damage due to oxidation, ultraviolet rays, acid rain, and other natural environmental factors. It has excellent weather resistance and anti-corrosion properties, ensuring the panel's durability and appearance. the exterior wall panels typically use PVDF or HDP coatings, which offer good resistance to ultraviolet rays, acid and alkali, and wear.

The uniform and densely-packed bubbles of the polyurethane foam in the core layer provide excellent insulation. Polyurethane foam has excellent thermal insulation properties, effectively preventing the transfer of temperature between indoor and outdoor environments to maintain a stable indoor temperature. Uniform and densely-packed bubbles can improve the insulation performance and strength of the panel while reducing its weight and making it more lightweight and easy to install.

The installation process for the wall panel is relatively simple, and the general installation steps are as follows:

Check the installation foundation: Before installing the wall panel, it is necessary to check whether the installation foundation is level, firm, dry, and free of oil stains and dust.

Prepare installation tools: Prepare cutting tools, installation tools, etc., for cutting and installing the wall panels.

Cut the wall panel: Use cutting tools to cut the wall panel to the required size.

Install the wall panel: Fix the wall panel on the installation foundation using installation tools, ensuring that it is level, vertical, and seamless with the wall and that the spacing between each panel is consistent, leaving expansion joints as required.

Install accessories: Install wall panel accessories such as corners, pressure bars, and lines according to requirements.

Welding treatment: Weld the joints of the wall panels to ensure a tight connection between them and prevent water leakage.

Anti-corrosion treatment: For wall panels that require anti-corrosion treatment, brush or spray them with anti-corrosion coatings after installation.

It should be noted that during the installation process, relevant safety regulations should be followed and safety protection measures should be used to ensure the safety of installation personnel. In addition, when cutting and installing wall panels, it is essential to follow the specific usage instructions and installation guidelines for wall panels to ensure the quality and effectiveness of the installation.

Q: Where does your factory locate?
A: Zibo City, Shandong Province, China.

Q: Are you a trading company or a factory? Can we visit your factory?
A: We have our own trading company and factory. Yes, warmly welcome to our factory.

Q: What's your MOQ:
A: Stock products: 1 m². Producing products: from 100 m².

Q: How long is your delivery time?
A: Standard products: 1~5 days. Customized products: 5-15 days.

Q: How do you guarantee the quality?
A: Each product has strict testing procedures (from raw material selection, manufacturing, quality checking, packing, and loading, etc.), and must be 100% quality checked before delivery.

Q: Can we order products of different colors?
A: Sure. We can produce according to the customer's requirements.

Q: Can you provide a sample?
A: Yes. We can supply free samples. Only the delivery charges will be covered by our customers.

Q: What about the terms of payment?
A: T/T(40% as deposit and 60% be paid against the copy of B/L)
LC(100% Irrevocable LC at sight) or other payments can be negotiated.

Tips For Choosing The Most Suitable Composite Board For You