During the construction of light steel villas, Decorative metal siding is often pasted on the walls. Once laid, it will not be removed again unless a new board needs to be replaced. Many users are also very concerned about whether the paving is firm. Decorative metal siding installation specification: how to check whether the installation is firm? Once it is not firm, the consequences will be very serious. Not only can it come off suddenly and be dangerous, but if it is not secure, it will have to be resurfaced. Therefore, it is necessary to check whether it is firm after the construction is completed.
So, what is the method to check whether the steel plate is laid firmly? There are mainly the following points:
1. First, we can increase the temperature near the metal engraved plate to see if the adhesive of the engraved plate will lose its adhesion due to the influence of high temperature.
2. Immerse the metal carved board in water to judge whether its installation and sealing performance are good.
3. Test the metal carved board with gravity to see if it will fall off due to gravity. After the construction is completed, all aspects must be inspected in time.
4. Metal carved panels must be firm during construction and must not fall off.
According to the above method, you can check whether the steel plate is firm in time. This requires construction personnel to be careful during installation. The inspection work after installation shall not be interrupted. Every detail of the carved board may affect the overall construction effect.